The switch 2 It’s not like other consoles. If you intended to take your Xbox Series X (7/10, cable review) In the park, you would probably need a very strange look backpack. For switch 2, portability is not just a function, it is a key sales point. Given this, there are two paths that you can do to establish the console for adventure, depending on how to play.
If your switch 2 will spend most of your life on your dock or your hands on your couch, I would recommend a attached cover. Like the phone cover, these tweezers in the console and joy, providing a minor shield for bumps and bruises. They often add additional functions such as ergonomic tweezers, although they allow access to common use ports.
On the other hand, if you are a world traveler you plan to take your switch 2 on each flight, train or road trip, you would opt for a classic transport box. These contain the console and games and usually have an additional space for cables or adapters. You can throw them in your bag while traveling for a trip and you know that your console will come to your destination.
One of the recurring complaints about the original switch, at least for me, is that joy-cons is very slender and are not very ergonomic. Especially for people with larger hands, the Pro driver made a much better option. For the hand game, the additional attachments became more and more common in the life of the console, adding a bulk and more traditional, more traditional to the joy.
As the cheerful are still flat at the back, many manufacturers have touched and integrated these cases from the jump. This is, for me, one of the main draws to add a case to your 2 switch, especially if you plan to play mainly in hand mode.
Unfortunately, you need a screen protector for your switch 2, thanks to the built -in plastic cover that will probably be scraped and shake over time. Generally, I would recommend buying one of the same brand of which you get your case or adherence, if one sells one. You will avoid any problem with the size or compatibility, and almost all the accessory manufacturers on this list offer some discount if you buy them as a package, not to mention saving on shipping.
There are still some factors to consider. Some dedicated manufacturers offer different finishes for specific situations, and applicators are also more common, which helps to ensure that everything is soft and properly aligned.
One of the main updates that Nintendo made for switch 2 is a new shot. It has the width of the console, with two firm hinges, and is a massive improvement to play. Unfortunately, none of the manufacturers could not find out what to do with him, which is understandable. There is no clear fixation point, so in most cases they included double -sided tape and a piece of plastic in the form of a foot that could only be hooked on the back.
It would be more concerned with eating the wrong or breaking the kickstand if you tried to eliminate it for some reason than a slight gap on the back of the case. Since I had to change a lot of cases, I generally jumped this step and, in almost every case, the additional piece is only cosmetic. Instead, I briefly tested the sticker strips included in one place on the back of my switch, just to ensure that they did not leave any obvious waste.
